288mm 4-stud discs

[NEIL SBD]

Hi i'm wondering if anyone can help me, i'm trying to source a set of 288mm 4-stud discs for my mk3 astra gsi. I think the conversion is off an early vectra. courtenay want £170 a set

 

[Ian]

you know you can get normal 5 stud ones and re-drill them don't you?

vauxhall trade club you can get discs and pads for around £60

 

[M9KDS]

will 15" wheels go over 288mm discs??

 

[NEIL SBD]

Hi ian yeah was thinking that could be my only option

 

[NEIL SBD]

288mm discs should fit 15" wheels because i know 308mm fit 16" wheels

 

[Ian]

depends on the wheel, some do some dont. VERY close fit behind them though

 

[NEIL SBD]

in fact they do sorry i had a set of 15" astra sport wheels on mine when my 17" wheels were getting refurbed

 

[M9KDS]

cool thanks for the info

 

[Mark T]

Merivas use 280mm 4 stud.

You could use 284mm calipers, I doubt the 2mm difference would affect breaking much.

 

[corsa_evn]

fiat turbo coupe disk's need to widen one or 2 holes but there fit fine and alredy a 4 stud patten, its what im useing

 

[fleck]

slightly cheaper than courtenay and rather nice looking... no idea how they perform though...

http://www.lmfvauxhall.co.uk/store/product.php?productid=17370&cat=2302&page=1

 

[corsa_evn]

http://cgi.ebay.co.uk/FIAT-COUPE-2-0-16V-TURBO-FRONT-BRAKE-DISCS/280448050999

there 284mm but im useing them fine ! with v6 calipers just need to widen the bolt holes

 

[GsiSpence]

I have a 288mm Brake kit in 5 stud taken from my GSI if thats of any help !

 

[cemex]

got a complete front 288 brake set up with good discs , pads and calipers if interested

 

[wayne1]

you could have got a set today at the autojumble , 288 calipers new dics for £75

 

[NEIL SBD]

I see chris astley motorsport are doing them for £67

 

[Neve'o]

you better see this thread first!! http://www.mk3oc.com/forum/showthread.php?t=54497

 

[Blythy]

only trouble with the fiat discs are there thinner than the vauxhall ones,when there new there at the minuimum for the vaux ones. just re-drill a set of 5 studs,its easy enough to do!