abs sensor mount front leg

DavebGsi

Administrator
Club Staff
Regional Co-Ordinator
Club Member
Joined
Apr 4, 2006
Messages
10,622
Reaction score
394
Location
essex
i've had a bit of an incident and while changing my bottom ball joint i have snapped my abs mount out of front leg! Hard to tell cause it's so rusty but it kinda looks like the mount itself is held in with 2bolts, mayb 1 from the back, and 1 from the front, behind the disk? Can anyone tell me if i'm right and if i can get another without changin the leg, cause i really can't be assed!
 

TomF

Club Member
Joined
Jul 30, 2006
Messages
2,462
Reaction score
82
Location
Liverpool
The sensor mount is held into the leg by one bolt, so it just unbolts from the leg as long as the bolt isnt rusted up.
 
Joined
Jul 11, 2007
Messages
803
Reaction score
0
Location
Chelmsford, Essex
one bolt and 1 pin.

the pins often break off on the metal brackets, newer ones were plastic and almost as likely to break off.

Drill out the remains and fit a new one.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top