Advice Needed LET w/ T3 Turbo

[5tox]

Shes all in and bolted up and ive started to come up against a few problems, the first one is that im running the 200sx manifold with a Cossie T3 turbo and i cant see any room for a radiator?

What options do i have? and has anyone else done a similar conversion?

 

[rc]

You can't use the standard gsi rad brackets at the top, but you can still use the bottom holes, you will need to tuck the rad forwards under the front panel, you just need to make sure/be aware of where the bonnet catch comes through, if you get the rad right the catches will clear it no prob's as will the turbo, there's pic's in my old thread SOMEWHERE Lol showing i had the large td rad with my gt28 and 200sx manifold.

 

[turbojay]

yeah i had same problem with the let radiator, my rad is tucked under slam panel and is fine but as ron said watch out for catch for bonnet, my rad catches bonnet catch and my bonnet dont open

 

[5tox]

cheers fella's, is the LET rad slightly shorter in length than the XE rad?