Calibra leather

[speedysam]

ok now it really annnoying me ive found a how to on fitting them didnt need it already in the car. So i found this http://www.allcorsa.co.uk/forums/showthread.php/wire-up-heated-25455.html
what wires connect where i have

Grey/green trace on each switch unknown what for
Solid black i presume 12v ignition live on both switches
Black/red trace unknown again on drivers switch
Yellow/black trace unknown on passenger side switch
Solid brown earth maybe on both switches

can somebody help me wire these as i want it out of the way and cant find a diagram of any sort any where

 

[Aber-Astra]

Not sure it matters much on the wiring side of things, but you have Cavalier leather, not Calibra.

 

[speedysam]

ok ive got power to the seats but there not heating up

Nick ive lost your number was going to text you the seats are heated though arnt they

 

[turbojay]

mine take agood 10 minutes to heat up. are they definatly not heating up

 

[speedysam]

10minutes this could be as ive onli been leaving them 5min

 

[speedysam]

ok ive been out for around 25min and there definatly not heating up power to the seats is fine so im stumped anny body with ideas

 

[Aber-Astra]

I never had them wired in Sam so can't guarantee the seat pads work, but since they have the plugs and wires hanging from underneath i'm gonna go out on a limb and say "yes" they are supposed to be heated....

How are you making sure you have power to the seats?

You could take 1 out, make sure you know which connector on the plugs is live and earth, and then try it direct to the battery terminals with a couple lengths of wire, or do it in situ if you have long enough lengths