Clear MK4 Side Repeaters

[chrishodgkiss]

Hey Guys just wondering if its hard to fit mk4 side repeaters to my astra.

Also, do i need to take the panel off to do so or do they just prise out?

Cheers

 

[Alex]

What side repeaters have you got on there at the moment? If its the oval ones then the MK4 ones will clip straight in (but will be backwards) or if you have the small round ones then you will need to cut the clips off the mk4 ones and use adhesive pads to attach them.

The current side repeaters are just clipped in, but can be a pain to remove

 

[BenAstra]

Or instead of cutting the clips of you could make the hole slightly bigger, the only part you need to make bigger is the little bit that sticks out where the clips go so just make that bigger

 

[Neve'o]

Stick them on, they will point the right way then too

 

[chrishodgkiss]

What side repeaters have you got on there at the moment? If its the oval ones then the MK4 ones will clip straight in (but will be backwards) or if you have the small round ones then you will need to cut the clips off the mk4 ones and use adhesive pads to attach them.

The current side repeaters are just clipped in, but can be a pain to remove

Yeah, I have the original orange oval ones but they are ugly

Cheers for the help

 

[Astraguy09]

If you have a ph2 then you can do it in seconds with a flat head screw driver (just ask Carver I did that on his today )

If you have a ph1 then you'll need to either trim the repeaters or cut the wing.

 

[chrishodgkiss]

If you have a ph2 then you can do it in seconds with a flat head screw driver (just ask Carver I did that on his today )

If you have a ph1 then you'll need to either trim the repeaters or cut the wing.

Thanks Astraguy, I'll be gettin them in the post soon so il update you if its a success