Want to remove ads? Become a MK3OC Club Member today!

Engine bays (pics)

Paul

B&
Joined
Jun 6, 2005
Messages
5,174
Best answers
0
Reaction score
0
Location
/dev/null
Ok seeing as we have a car thread ;) might as well do a thread with only engine bay pics! It must be yours or a mates and must not be any bigger than 800x600. If you have to host them, use www.imageshack.us

Ill start.

Mine but have alot of plans for it..

S4010090_s.jpg
 
mines is too small and dirty and doesnt deserve a photo :(
 
My enginebay on the orange...
IMGP4867.JPG


The red one isnt worth showing... Just a standard 2,0 8v
 
Thanks Ben. Cant wait til I get hold av a V6 and can start that conversion...
 
Took me a while to work it out!

You're using the airbox (minus filter, I assume?) because you can't be ****d to buy a cold air filter and extension hose for the filter?

PS: Someone's stolen your battery ;)
 
Quite possibly the cleanest GSi in the known universe!
 
Here's mine

EngineBay.jpg

Crankshaft seal on g/box side needs replacing. Other than that, just the GENUINE carbon fibre air filter - sealed, so no more hot air :) Cold air feed gets jammed down the rad, skimming the belt, and saying "AAH" in the corner of the bigmouth.

Naturally, "Universal Fitment" meant "Jam tight with jubilee clips and gaffer tape"
 
EasyRob said:
Took me a while to work it out!

You're using the airbox (minus filter, I assume?) because you can't be ****d to buy a cold air filter and extension hose for the filter?

PS: Someone's stolen your battery ;)

Guilty as and yes no filter inside that airbox :whistling , bit cheapskate I know. But there's going to be a proper cold feed going to it soon. I've now got a battery in it now lmao . Plus, i'll be doing a few more changes to pep up the rather pony engine.

Then some day a 20SEH.
 
Last edited:

Users who are viewing this thread

Back
Top