** Forsale Lexmaul Performance Exhaust Manifold X20XEV **

[*Adz*]

I have forsale a Lexmaul Performance Exhaust Manifold X20XEV - Calibra *routes under of sump* I know this come of a calibra, as i removed it myself..... i couldnt tell you what over x20xev's it would go on tho..... altho im sure they are all the same.... *Please check before buying*

This retails @ £322 + VAT from Regal Click Here

Oviously its secand hand... but nothing major wrong still all in 1 piece...... Heres a few pics so you can see.....

Im looking for £195 posted.......

Any Qz Please ask....

 

[*Adz*]

Sorry forgot to put, am open to near offfers....

 

[*Adz*]

this goes the drivers side of sump btw....

 

[*Adz*]

£175 Posted....

Lexmaul estimate between 7bhp & 12bhp with a better throttle response... and increase in torque...

 

[rick151081]

i just sold one of these 4 60 quid off a 1.8 xev think i done myself over if thy fetch that sort of money

 

[melv]

i just sold one of these 4 60 quid off a 1.8 xev think i done myself over if thy fetch that sort of money

You sure did.

£175 posted is a cracking price. I'm just away to email a couple of people the link for you adz

 

[*Adz*]

Cheers melv... and rick... sorry to hear that lol

 

[rick151081]

o well at least someone is puttin it tp use instead of it bein stuck in the garage

 

[*Adz*]

bumpage

 

[fizzer06]

i bought one of these off someone off here, just to let people know they do not fit x20xev engines on a P reg. they require a bit of chopping and welding to get them to fit. hope this helps people

 

[*Adz*]

i bought one of these off someone off here, just to let people know they do not fit x20xev engines on a P reg. they require a bit of chopping and welding to get them to fit. hope this helps people

yeh, cos of the way the sump goes.... the head is the same, its just the sump that sits different... i did put up the top that it goes that way

Cheers bud.

 

[wayne1]

mod it to go on the red top ,,, or the LET

 

[*Adz*]

me let? nar im not silly

and i had that SBD one on the xe didnt i.

 

[*Adz*]

bumpy

 

[M9KDS]

Hi rick151081
sorry dident relise thay went for that!! and you did make the price!!
is all on and pulls alot better will show you at the meet thanks mate

 

[Kev_mk3]

i bought one of these off someone off here, just to let people know they do not fit x20xev engines on a P reg. they require a bit of chopping and welding to get them to fit. hope this helps people

so does that rule the R reg ones out?

 

[rick151081]

no worries m9kds rather it went 4 that than sit in the garage mate plus i didnt relise they went 4 that and i ve chucked loads of that lexhaul stuff in the tip

 

[*Adz*]

so does that rule the R reg ones out?

take a look @ your sump.... its its same as a xe... then will be ok goes round the drivers side half... if you get me lol....
But you can still get it to fit, just would have to cut the bend and weld another bit of pipe in....

 

[fizzer06]

you have to cut the bottom half of the 4 branch off (the bit that goes round the sump) and weld the original down pipe onto it, fairly simple realy just a bitch to get it bob on.

 

[*Adz*]

you have to cut the bottom half of the 4 branch off (the bit that goes round the sump) and weld the original down pipe onto it, fairly simple realy just a bitch to get it bob on.

Thank you mate