Want to remove ads? Become a MK3OC Club Member today!
heater speed resister
- Thread starter allanm114
- Start date
pop your bonnet remove the plastic cover at the back of your engine bay and you will see a pollen filter un do the clips and remove the filter look in side and you will see some wire's and a green thing it's held in by a torx screw, use flat nose peliers to remove the clip with all the wire's ((this will be stiff)) and replace with a new one 
http://shop.ebay.co.uk/i.html?_nkw=...cles_CarParts_SM&_fscr=1&_trksid=p3286.c0.m19
http://shop.ebay.co.uk/i.html?_nkw=...cles_CarParts_SM&_fscr=1&_trksid=p3286.c0.m19
its under the bonnet where the pollen filter is, right under the plastic trim below thewindows drain panel
pull the long rubber strip off at the top of the engine bay and pull out the long plastic bit, its under the small filter
pull the long rubber strip off at the top of the engine bay and pull out the long plastic bit, its under the small filter
dont worry, if you have funds joine up as a full member and you will know a lot more about car's in our usefull sec 
its under the bonnet where the pollen filter is, right under the plastic trim below thewindows drain panel
pull the long rubber strip off at the top of the engine bay and pull out the long plastic bit, its under the small filter
supercharged XE
I think i need to chance the resistor too, I've only got 1,2 & 4 on the switch
Below this
its under the bonnet where the pollen filter is, right under the plastic trim below thewindows drain panel
pull the long rubber strip off at the top of the engine bay and pull out the long plastic bit, its under the small filter
/\/\/\ Added to wishlist /\/\/\
thanks to all you's guys who helped with pointers as to where i'd find heater speed resister. i've now got a fully opperating heater on all 4 settings lol. its such a great thing, i even got a spare 1 whilst i was climbing all over cars in the scrap yard
Odd co-incidence but mine for the first time ever played up today, wouldn't work on 1/2/3 left it on 2 for a while about 10 secs and it started been fine since, think I'll rob one from scrappy though just in case!!
tabetha
tabetha
Wen i went to change my speed resister i found that sum idiot had been there befor me and never put torx screw bak in. So i think resister been jumpin about and only makin contact sumtimes as my heaters were tempremental at first befor ****n up completely
yeah, these 94/95 models had this a bit with Ph1 and Ph2 mixed fittings
Found the correct one via Ebay and Vauxhall Parts Warehouse
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200443266695.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200443266695.