Search results

Hi all, After the covers that go over the steering column behind the wheel, off a phase 1 non air bag. Cheers

As some of you already know, I recently passed my bike test an acquired this beauty. It's already got a few bits on it like stubby levers and a remus exhaust which sounds bonkers. Also got a carbon fibre rear hugger, aftermarket windscreen and braided brake lines. Previous owner started...

So another car in my fleet is a Corsa D 1.2 Hardly sets the world on fire, but it's been a great run around so far and handles like no ones business. Out handles the modded Astra in stock form easily. It was the replacement for what was Beth's first car, the Arizona Mk3 (and now Saab turbo'd)...

Full exhaust system for a MK3 Astra with 3 hanger style rear box. Completely stainless steel, 2" bore, with cat and decat section to suit C20XE downpipe. Over the years I have spent £1,005 on this exhaust. In picture from left to right, sports cat, de-cat section, centre section and rear...

They're in OK condition, few rips here and there on the back from previous owners. Drivers side one has tape on the side to stop it wearing but it's not covering a hole. Material is getting a bit thin in places from contact. No frames, base mount. Priced at £40. Located in Nottingham

Got some skirts for sale Alright condition, clean up well. Would prefer to be collected from Nottingham, I don't have much time to package these up but I will do if needs be. Price £30

I've got a set of electric 160 clocks, and they're showing 160+ k miles now. I want to set them back to the same mileage as the new shell at around 80k miles. Does anyone know how to do it without breaking them? Last time I did it on a set of mechanical ones they got stuck.

Do they fit under 14" wheels? Specifically the Arctic wheels?

Decided that I might sell my half cage. It is just a show cage, but I bet it would still hold a fair bit of weight. Currently still in the car, so gauging interest mainly but if someone wants it for say £100 I'll happily take it out ready for collection. That's less than what I paid for it...

Need some electric clocks as mine are sticky on the speedo. 160mph needed, prefer 8k rev, prefer 4 cylinder rev counter. THANKS!

Hi all, Just want a second opinion on this one. Drove to work, got to a round about, went to change, no 4th, notchy 3rd, 2nd and first and reverse all work fine. Had a look on EPC and first and second is on 1 selector rod, 3 and 4 on another with a weird sleeve for 5th on the same rod...

Here we go again! Some of you might remember this was Beths car, and looked a little like this: Well, it failed an MOT just over a year ago, broken rear spring, CV boot and emissions and was replaced with this: And it never felt so good to have 1 less car to maintain. Until...

Spax -35mm Springs: http://www.gumtree.com/p/cars-vans-motorbikes/mk3-astra-spax-lowering-springs/1030444684 Pi Front shocks: http://www.gumtree.com/p/cars-vans-motorbikes/mk3-astra-pi-front-shock-absorbers/1030444873 Saab B204/B234 DI Pack...

Anything stopping me replacing my outer ball joint with something like this? http://www.jjcraceandrally.com/trackday/rod-ends-bearings/aurora-metric-female-general-purpose-precision-rod-end-bearings-2 Thanks

Big block servo needed to suit a cav/cally turbo master cylinder. Part number 90487039 Should look a little like this? Best price posted, or locally collected as soon as possible please.

Hi all, Got Mtec to add some pre re-drilled 288mm's to their website. Pick your style for £90 delivered. They're £70 from my local factors for plain pattern part ones. http://www.mtecbrakes.com/mtec769-4x100mm-pcd-288mm.html They can also make spigots for £20 Thought they might be...

Need a big block drive shaft, with an ABS ring. Either side, dont really mind as long as the joints and boots are in good condition. Going to billing if that helps anyone. Thanks

Looking at upgrading since mine have warped. Few questions. I have Saab 9-3 carriers and calipers from the 288mm brakes, I assume these will just bolt straight on and the carriers wont be a problem. Will they fit under 15" wheels? Which disc is best to use? Meriva 280mm with a bore...

Any way to quickly tell which is the problem brake? Making the whole car shake now when it's over 50mph. Annoying too since all the brake components aren't very old.

For sale is my much loved C20XE. I bought it with unknown milage although I was told it was mid 90k I have receipts from Autovaux up to the sum of about £700 for all the bits that went in to it. Now has around 14k miles since the rebuild and drove like new up until the point of removal...