Want to remove ads? Become a MK3OC Club Member today!

Search results

  1. Astraab

    Urgent c20xe cavalier loom needed asap

    as above i desperetly need a late cavalier GSI 200 c20xe loom , it need to be the late Coil pack loom and be in good condition , my ecu is (PT) motronic 2.8 i think . i need a loom and the fuel relay plug with a nice bit of loom coming from it , my car had a massive short out and the whole...
  2. Astraab

    isuzu with no glowplug light?

    relay / bad earth / rare but all 4 glow plugs could be faulty / my bet is either relay or earth mate
  3. Astraab

    Lowered the car

    aye the end of the springs should sit in a little grooved stopper on the top and bottom plate . if these arnt sitted right , when you turn your basicly trying to pull the spring apart till it slips . sounds like a creaking , just chuck your had under and cheack if the end of the springs are...
  4. Astraab

    phase 2 chips in my c20let

    eds mate? i had phase 2 . low boost was 7-8 psi . high boost was 19 psi with 22psi overboost . i had a cosworth adustable fpr set at roughly 3,5 bar
  5. Astraab

    Astra will not start

    could be sticky yeah . or dodgy earths . could even be the relay
  6. Astraab

    C18XE inlet hose

    best to make your own mate . will be the same just **** load cheaper
  7. Astraab

    selling my astra what you think its worth or what would you pay

    its stated mate that its 1.6 on log book so its not a gsi
  8. Astraab

    Hi everybody

    welcome mate any pics?
  9. Astraab

    What head gasket thickness for XE to LET conversion?

    yes it will but you can turbo any engine as long as boost is around 5 psi ish , its not recomended you do this ofcorse lol but if you are guna do it id have gaskit around 2mm to lower compression
  10. Astraab

    been a while

    mines the sti lump and goes like stink jim stop tryin to das ma ride jim ya git at least mines on the road ;P
  11. Astraab

    Banger racing

    i have done a few in my old nissan primera . took 7 sessions before she gave up lol . the sr20de engine is indistructable . solid car too
  12. Astraab

    someone to help with Brake Lines

    will be different mate as the brake hoses will be in a different location going from a solid beam to indapendant hubs , not saying theres guna be loads of difference but will be abit i imagine due to chassis mod
  13. Astraab

    someone to help with Brake Lines

    he has a 4wd astra mate , will probly need custom ones made
  14. Astraab

    someone to help with Brake Lines

    nps mate just message me on ere or FB :beer:
  15. Astraab

    someone to help with Brake Lines

    well brake pipe you can get from motor factors easy , as stated by dave youll need a good 15 to 20m of pipe for whole car . youll need male and female unions and a brake flaring tool . you can get it all from motor factors including a cheap flaring tool . be warned tho if you buy the harder...
  16. Astraab

    been a while

    wellcome back mate , i got a classic scooby too . but mines wrx sti . get a new engine mate you dont know what ya missin ;)
  17. Astraab

    someone to help with Brake Lines

    i can do them and show ya as well if you get the pipe / unions / and flare tool . real cheap tbh mate . how many you need doing?
  18. Astraab

    NISSAN Skyline GTS

    swapped for scooby pls close
  19. Astraab

    NISSAN Skyline GTS

    swapped for a scooby pls close
  20. Astraab

    my skyline now on ebay , no reserve

    Car For SaleMake and Model my skyline now on ebay , no reserve Description: http://www.ebay.co.uk/itm/270956656837?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649#ht_740wt_1076 Location lyme regis Is the V5 present for the vehicle? Yes Is the engine type/cc correct on the V5? Yes Price...
Back
Top