hello everyone need abit of advise here i have just brought a complete calibra redtop because my astra is auto will it be straight forward fitting the redtop in like a manual or do i have to modify anything major 
Want to remove ads? Become a MK3OC Club Member today!
fitting redtop 2 astra mk3 auto
- Thread starter bx86
- Start date
That's what I thort just wonderd if I have got to drill or cut any holes or enythin
You could use the auto box if its from a 1.8 onwards as its the same bell housing but you wouldnt have the overdrive ect.
Much better to use the manual stuff tbh. Your gona take the engine out anyway so its quite easy to change the peddles ect over.
Much better to use the manual stuff tbh. Your gona take the engine out anyway so its quite easy to change the peddles ect over.
its only a 1.4 auto but as i have got the complete car am just going 2 put the lot in and put engine and box on ebay . just 2 be certain i dont have 2 cut or drill any holes it is all straight forward ????
Pritty sure there isnt any drilling involved in changing the pedal box and the gear shifter over. Holes should already be there.