• Welcome to the MK3OC Classifieds section:

    Please take some time to read the rules found here: Rules and Guidance.

    - If you are a trader, then please Contact Us.
    - Any other queries then you can get assistance in the HelpDesk.

Want to remove ads? Become a MK3OC Club Member today!

Astra Sport - lots of parts available

Status
Not open for further replies.
Joined
Aug 7, 2007
Messages
119
Best answers
0
Reaction score
0
Location
Portsmouth
Sadly I've decided to break my white 1997 Astra 2.0l Phase 2 Sport (Ecotec X20XEV).
PLEASE NOTE - MANY OF THESE PARTS WILL FIT GSi's Phase 1/2 or any X20XEV/R engine including Cav /Vectra/Omega

If you want an item but cannot afford immediately please pm me - an agreed deposit will secure until later.
This is not a full list, so if you need something pm me and I'll let you know if I have it.
Mk3205bhpEcotecX20XEV.jpg


X20XEV piston / rods etc (no rings) x 1 Used but vgc £15
X20XEVEcotecPiston.jpg

Body - Gen Vaux Hatch upper spoiler - standard in white Used £5 + £8
Body - Spoiler - Boot Upper - Gsi without brake light in white Used £15 + £8
Body - Gen Vaux Rear Light Clusters including back-plates and all bulbs Used £15 each posted
Ph2AstraRearLightClusters.jpg


Cooling - Radiator 90443392 (Nearly New) Used 25 + £12
Cooling - Radiator Cowling + Fan + Sender 90265781 / 90512980 (£165.68) (Nearly New) Used £50 + £12
CompleteRadAssembly.jpg

RadiatorFanCowlingFan.jpg

Starter Motor Used£20 posted
Power Steering Pump Used £20 posted

Steering Wheel - OMP Dished wheel (35mm Dish / 350mm dia) - 200 miles only - mint £80 posted
SparcoSteeringWheelBoss.jpg


Suspension - Strut Brace - Front - E-Tech Polished Alloy - Adjustable Used £65 posted
StrutBars-RaidE-Tech.jpg


Cam Pulley Backplate X20XEV 4116092297 (Metal type) £5 + £3
CamBackplate.jpg

Ignition Barrel / Transponder / key £25 posted
Lock set (separate or to go with above) 2 x Front door / boot / 1 key Used£15 + £8
2 x black handles for locks with backing plates £8 each posted

X20XEV Cylinder Head modified by Blydenstein to A-pack spec, and recently fitted with Kent Cams uprated valve springs / seats. (Does not include cams - shown for photo only)
£350 + £35 - coll pref[/B or £250 with standard valve springs.
Z20XEVBlydensteinApackhead1.jpg

Z20XEVBlydensteinApackhead2.jpg

Z20XEVBlydensteinApackhead3.jpg

Z20XEVBlydensteinApackhead4.jpg

Z20XEVBlydensteinApackhead5.jpg

Z20XEVBlydensteinApackhead6.jpg


6) Jetex 100 cell Sports Cat £115 + £15 carr - coll pref
DSCF3031.jpg
 
Last edited:
quick question about the subframes. my mate has some bucket seats for sale and my subframes dont fit as these specific seats require the subframe to be bolted on directly into the bottom so the bolt goes in vertically where as the astra subframes bolt on the side so the bolts go in horizontally. so do the subframes you have bolt on like normal astra subs or will they fit the seats i have described? sorry if this is difficult to understand but i cannot think of any other way of wording it.

cheers chris
 
quick question about the subframes. my mate has some bucket seats for sale and my subframes dont fit as these specific seats require the subframe to be bolted on directly into the bottom so the bolt goes in vertically where as the astra subframes bolt on the side so the bolts go in horizontally. so do the subframes you have bolt on like normal astra subs or will they fit the seats i have described? sorry if this is difficult to understand but i cannot think of any other way of wording it.

cheers chris

Hi Chris, no problem.
These are Sparco subframes which I have mated to standard Mk3 subframes, so they'll fit Mk3s fine. The Sparco frame bolts vertically into the seat from underneath, not the side.
I've added a picture of the driver;s seat so this may help (sorry it's not the best angle)
Reason these are pricey is that the two together cost over £120 from Demon Tweeks

CopyofDSCF2498.jpg
 
thats just what im after mate, i cant seam to find them anywhere :( i will check my funds and hopefully i will be able to have them off you. i will get back to you asap mate. cheers
 
do you have the 2 black interior sill covers mate and how much posted for those and the boss for the steeringwheel?
 
Hi chap, don't suppose you kept the rear copper lines from flexi to calliper?

Cheers!
 
My mates interested in your front splitter, would you take £40 posted?
 
Status
Not open for further replies.

Users who are viewing this thread

Back
Top