Amp Connectors

[BenAstra]

Can anyone recommend a set of decent connectors for connecting my amp up?

My amp is one with the screw clamp you put the wires under and screw down but just looks untidy

Needs to be for +/- as well as speaker cables

 

[jono_astra]

.

 

[BenAstra]

Battery end and earth point in the car do, were on the cables from new. Amp end is just cable :/ Has been fine, doesn't effect quality etc it just looks untidy!

Thanks for the link

 

[reno]

Just clamp to the bare cables pal. Ofc cable is best to use

 

[Andy_Mk3]

I don't have ends in mine.

 

[big e]

Don't have ends on mine, but they do go into a hole with a grub screw so carn't be seen anyway..

 

[Andy_Mk3]

Yeah same with mine.

 

[djwilde69]

All I would do it put solder on the ends

 

[Andy_Mk3]

Soldering thick amp cables is next to impossible.

 

[diceboy]

Not if you use a mini blow torch

 

[BenAstra]

Mine don't have the whole, they have the clamp which holds them down to solder wouldn't help. I'll have a look at terminals like Jono posted

 

[big e]

They'll be ok for the speaker wires but id use proper gold plated ones for the feed and earth wires..

 

[reno]

the whole point is using high qlty copper cabling, thicker the better for power and earth. you don't want connectors, your adding resistance

 

[jono_astra]

.

 

[BenAstra]

I'll have a proper look into it. I may just take a leaf out of daves book and buy new just because it has to come out